* USB 2.0接口；   

*IAR  EWARM 集成开发环境无缝连接的JTAG仿真器

*支持所有ARM7/ARM9内核芯片，包括Thumb模式

*支持ADS, IAR, KEIL, WINARM, REALVIEW等几乎所有的开发环境

*下载速度高达ARM7:600kb/s, ARM9:550kb/s,通过DCC最高可达800kb/s

*最高JTAG速度12MHz

*目标板电压范围1.2V – 3.3V

*自动速度识别功能

*监测所有JTAG信号和目标板电压

*完全即插即用

*使用USB电源(但不对目标板供电)

*带USB连接线和20芯扁平电缆

*支持多JTAG器件串行连接

*标准20芯JTAG仿真插头

*选配14芯JTAG仿真插头

*选配用于5V目标板的适配器

*带J-Link  TCP/IP  server,允许通过TCP/IP网络J-Link支持ARK内核

*ARM7TDMI  (Pev 1)

*ARM7TDMI  (Pev 3)

*ARM7TDMI-S  (Pev 4)

*ARM720T

*ARM920T

*ARM926 ET-S

配件清单:
1、J-LINK仿真器 1 台
2、USB线 1 条
3、20PIN 优质连接线 1条
4、光盘 1张

本产品三年保修

使用手册下载

J-Link ARM Specifications
1、Target voltage can be measured
2、Fully plug-and-play compatible
3、Supports any ARM7/ARM9 core, including thumb mode
4、Powered through USB (<50mA)
5、Full USB 2.0 speed
6、Download speed up to 600 kBytes/s
7、DCC speed up to 800 kb/s
8、Max. JTAG speed 12 MHz
9、Standard 2x10 pin JTAG connector
10、Automatic core recognition
11、Auto speed recognition
12、Support for multiple devices on scan chain
13、Fully plug-and-play compatible
14、All JTAG signals can be monitored
15、Supports 1.2-3.3 V target voltage

Supported ARM Cores:
J-Link has been tested with the following cores, but should work with any
ARM7/ARM9 and Cortex-M3 core.
* ARM7TDMI (Rev 1)
* ARM7TDMI (Rev 3)
* ARM7TDMI-S (Rev 4)
* ARM720T
* ARM920T
* ARM922T
* ARM926EJ-S
* ARM946E-S
* ARM966E-S
* Cortex-M3